English
SUKO-1

Okwu mmalite nke PTFE Ram Tube Extruder

PTFE Ram tube extruder bụ nke a haziri maka mmepụta nke PTFE (Teflon) ma ọ bụ ultra high molecular (UHMWPE) tubing.

1. PTFE Tube Ram Extruder

PTFE Ram tube extruder pụrụ iche maka mmepụta nke PTFE (Teflon) ma ọ bụUHMWPEtube.Dị ka nha nke tube achọrọ, nhazi igwe ahụ dịkwa iche iche, na-eji ụdị dị iche iche.

 

2. Ụkpụrụ na-arụ ọrụ nke igwe

A na-etinye ntụ ntụ PTFE na gbọmgbọ nri nri, a na-edozi ntụ ntụ ma na-akpụzi ya n'okpuru nrụgide nke hydraulic press, wee kpoo ọkụ site na ụlọ kpo oku ruo oge ụfọdụ, nkwụsị na ịkpụzi, n'ikpeazụkwa, tube achọrọ na-apụta, tube ahụ. nwere ike ịdị ogologo oge na-enweghị ngwụcha, onye ọrụ nwere ike bee dịka ogologo achọrọ.

 

3. Ụdị nke Machine na Datasheet
Ụdị igwe PFG150 PFG300 PFG500
Usoro

Ebe kwụ ọtọ Ram Extruder M/c
Ike KW (moto eletriki) 15kw 22kw 72kw
Oke Oke OD 20-150 mm 150-300mm 300-500mm
Nkwenye THK 0.1-0.2mm 0.1-0.2mm 0.1-0.2mm
OD ndidi 0.1-0.5mm 0.5-2 mm 3mm
Ogologo Tube Extruded

Gaa n'ihu extrude na ogologo na-akparaghị ókè
Mpụta kwa elekere KG 8+ 10+ 13+
Voltaji/PH/Hz 380V 50Hz 3P 380V 50Hz 3P 380V 50Hz 3P
  • Chekwaa oge, otu onye nwere ike ịrụ ọtụtụ igwe.
  • Ihuenyo mmetụ PLC nwere ọgụgụ isi ma dị mfe iji rụọ ọrụ.
  • Obere ebe ọrụ chọrọ n'ihi nhazi kọmpat ya na igwe nchekwa ọkụ eletrik.
  • Mmepụta kacha mma yana njirimara anụ ahụ bụ mgbanwe.
  • Njikwa okpomọkụ ziri ezi, ruru ogo +-1.
  • Ogologo ndụ, na teknụzụ ọgbara ọhụrụ na nhazi kachasị mma.
  • Elu elongation, ike ntakiri & ike ndọda pụrụ iche.
  • Usoro nri akpaaka, gụnyere gbọmgbọm igwe anaghị agba nchara.

 

4. Ntuziaka nwụnye
Ụdị igwe Elu ala ala Igwe igwe dị elu Oghere igwe Dayameta oghere
PFG150 3000-6000mm 2460 mm 1000mm 300mm
PFG300 3000-6000mm 2879 mm 1000mm 450mm
PFG500 3000-6000mm 3100mm 1000mm 650mm

 

5. Usoro eji arụ ọrụ igwe

  1. Lelee wiring, hoses na mmanụ hydraulic.
  2. Wụnye nha nha achọrọ.
  3. Jiri usoro nri akpaaka ma ọ bụ inye aka, malite ọrụ ntuziaka igwe.
  4. Malite ikpo ọkụ site na ịtọ ọkụ ọkụ site na panel PLC.
  5. A na-agbanye tube extrusion site na ụlọ kpo oku.
  6. Bee tube ahụ ka ị nweta ogologo oge ịchọrọ.
  7. Enwere ike kwụsịtụrụ ma mechie igwe ahụ site na njikwa njikwa PLC.

 

6. Nlekọta nke igwe na akụrụngwa
  • Lelee ịdị elu, ịdị ọcha na okpomọkụ nke mmanụ hydraulic mgbe niile.
  • Hichaa ihe a na-ejighị mee ihe ma tinye mmanụ mgbochi nchara n'elu maka nchekwa.
  • Ekwesịrị itinye ihe mmetụta okpomọkụ nke mgbanaka kpo oku nke ọma.
Oge nzipu: Nov-11-2018