SUKO-1

PTFE Plastic Tapawa Extruder igwe

Ndewo, bịa lelee ngwaahịa anyị!

PTFE Plastic Tapawa Extruder igwe


Nkọwa ngwaahịa

Mkpado ngwaahịa

Okwu

PlasticTapawa PTFENjirimara igwe:

ü Nabata ọsọ na-agbanwe agbanwe iji nabata pitch, ọ dịghị mkpa ịgbanwe gia mgbe ị na-arụ ọrụ;

ü Ịrụ ọrụ dị elu;mmepụta ọnụego bụ ugboro atọ elu karịa ugbu a na-emebu igwe kwa hour, na max mmepụta iru 98m / awa;

ü Low mkpọtụ, nnyefe na Anam Udeme usoro ịmụta absorbing ụda, ibelata ịma jijiji na inserting akụrụngwa;

ü Nlekọta dị mfe, nnyefe na-agbanwe, nhazi dị mfe wụnye ma wepụ.

ü More enyi na enyi na gburugburu ebe obibi: ọ dịghị PTFE ntụ ntụ splashing ma ntụ ntụ mmepụta na-akpaghị aka

ü Njikwa ọgụgụ isi: na-emepụta gaskets site na ịchịkwa oke ike

ü Ọtụtụ oge na-azọpụta : ike na-apụ na-akpaghị aka mgbe nọmba mmepụta na-edozi

ü Ogologo oge na-arụ ọrụ: enweghị okpomọkụ mgbe ọ na-arụ ọrụ.

ü akwa mma components eji.

Chart erugharị

Paster Extrusion tube usoro:

PTFE Fine Powder raw material → Sifting → Mix with mgbaze → kpo oku → Ime → Extrusion → Sintering → Finished Tube.

Igwe ejikọtara ọnụ: Igwe na-enyocha igwe, igwe na-agwakọta, igwe na-arụ ọrụ, igwe na-apụ apụ, na ọkụ ọkụ, Mould.

Data teknụzụ:

Tapawa Extruder Ụdị &Data teknụzụ
DX-D01 (dabara maka 25-60oghere oghere)OD: 2mm-6mm PTFE Tapawa extrusion Hose Main igwe: 30KW ike 380V 50Hz otu isi mmalite na hydraulic drive.1.2M elu maka ihe ibu cavity.WorkBlank igwe: 3KW na 380V 50Hz Hydraulic mbanye PTFE oghere elu na 300-600mm .300Hz na 300-600mm .Furnace elu 8.5M 500 degrees okpomọkụ.
DX-100(dabara 60-120 loading oghere)OD:6MM-60MM -2 oghere oghere FE Tapawa extrusion Hose Main igwe: 30KW ike 380V 40Hz otu isi mmalite na hydraulic drive.1.5M elu maka ihe ibu cavity.WorkBlank igwe: 3KW na 300V 50Hz Hydraulic mbanye PTFE oghere elu na 300-600mm.

Nkọwapụta igwe PTFE Hose

* Ogologo ndụ ọrụ site na ịrụ ọrụ siri ike na iji ihe ndị dị elu*Mgbidi dị ala dị ala site na mandrel na-adabere na ya na oghere pụrụ iche*Ihe ntụgharị dị ka nrụgide, ike na ọsọ ebule maka njikwa na-adịgide adịgide nke usoro extrusion na ọsọ extrusion.*Mmechi hydraulic nwere ike mmechi dị elu maka ibu ngwa ngwa nke extruder*Pụrụ iche tupu ụdị pịa na tupu ụdị nkwadebe ngwaọrụ maka multiple loading nke loading ụgbọ ntụgharị extruder*Igwe ọkụ na-agbanwe agbanwe*Atụ na ịchịkwa usoro maka mgbe niile extruder ọsọ*Usoro nchịkwa maka ọsọ ọsọ nke extrudate mgbe niile*Sistemụ-enyi na enyi na enweghị mmezi*The mado extrusion usoro e mere karịsịa ka costumers arịrịọ*Ndozi akpaaka nke usoro mkpokọta yana ndekọ nke usoro*Na-arụ ọrụ site na ihuenyo mmetụ na ndekọ nke paramita usoro extrusion

Kpọtụrụ anyị taa

Ndị ọrụ anyị na ndị ahịa ọ bụla na-arụkọ ọrụ ọnụ iji hụ na ọrụ ọ bụla na-emezu ihe ị chọrọ na ụkpụrụ anyị dị elu.Kpọtụrụ Sunkoo taa!

Biko mara: Ozi teknụzụ ọ bụla enyere bụ naanị maka ebumnuche ozi.Tupu ịkọwa igwe a maka ngwa gị, biko mee ka anyị mara ihe ịchọrọ iji nye ndụmọdụ maka igwe dabara adaba maka gị.


  • Nke gara aga:
  • Osote:

    • By :

      dsfdfdf

    • By :

      adasd

    • By :

      Mfe ngwa ngwa na ntụsara ahụ

    • By :

      Mfe ngwa ngwa na ntụsara ahụ

    • By :

      suko na-ere ihe dị mma na ọnụ ahịa dị oke mma.

    Dee nyocha ebe a:

  • Dee ozi gị ebe a ziga anyị ya